Multilayer lamination of textiles, membranes and foams

FERCOS laminates three or more layers of roll material, with the most suitable adhesive at each joint: hot melt, reactive PUR or PSA. A textile with a foam and a lining, a membrane between two fabrics, a self-adhesive laminate protected by paper. We work to order.

Request a quote

How a multilayer laminate is made

A multilayer laminate joins several layers of material, bonded to one another by one or several types of adhesive. An adhesive is almost always needed, because the layers do not adhere to each other with heat or pressure alone.

Each joint is a decision. Depending on the materials, the composition and the finish, the type and the amount of adhesive change. We can use the same in both joints or a different one in each.

Adhesives can make the fabric stiffer. Many stay flexible, elastic and soft once dry or cross-linked, and can be used on stretch or heat-sensitive components without taking away their elasticity.

Direct bonding (two materials)

One adhesive for each joint

We do not use solvent-based or water-based glues. Only solid hot melt adhesives, which meet EU environmental requirements.

Heat-activated hot melt

Joins layers with solid hot melt adhesives of EU origin. It is applied hot and sets as it cools. Biodegradable alternative adhesives also exist.

Hot melt coating

Reactive PUR

It is the most used when you want flexibility and adhesion to many materials. With PUR, the laminate stays flexible, elastic and resistant to washing and temperature.

Reactive PUR lamination

PSA (self-adhesive)

A laminate with self-adhesive properties, on one side or both. Each coated side carries silicone paper or film that protects the adhesive, on our PSA hot melt line.

PSA self-adhesive coating

The layers we combine

The component materials of a multilayer laminate can be, for example, these.

  • Technical textiles and fabrics
  • Decorative foils
  • Films and sheets
  • Membranes
  • Nonwovens
  • Glass fibre fabrics
  • Paper
  • Foams and industrial synthetics

Where a multilayer laminate is used

Footwear and insoles

Structures of fabric, foam and lining, in which each layer does its own job.

Automotive

Textiles laminated with foam for upholstery, linings and coverings.

Home textiles and mattresses

Fabrics laminated with foams and membranes for mattresses and protectors.

Technical clothing and protection

Fabric, membrane and lining in a single material.

Footwear and insolesAutomotiveHome textiles and mattresses

Technical capabilities

ParameterValue
Layers per laminateThree or more.
AdhesivesHot melt, reactive PUR or PSA, one per joint
Usable widthOn request
Adhesive weight (g/m²)On request
Thickness and weight of each layerOn request
Minimum order and sample quantityOn request
Typical lead times (sample and production)On request
Delivery formatOn request
Process controlAutomatic monitoring of adhesive weight, width and tensions

Advantages and limitations

Advantages

  • Each layer does its own part (barrier, comfort, structure), and the laminate reaches your customer in one roll.
  • The adhesive is chosen for each joint, rather than one for the whole assembly.
  • It can have self-adhesive properties, on one side or both.
  • Each production run is recorded per customer: adhesive weight, tensions, temperatures and adhesive lot.

Limitations

  • More layers mean more joints, and each joint is a place that can fail and has to be tested.
  • The adhesive can leave the laminate stiffer. It is also chosen for the feel you want.
  • The assembly inherits the limits of each adhesive: a thermoplastic hot melt softens again with heat, and PUR needs curing time.

Guide: Hot melt, PUR or PSA?

Trials before production

In a laminate, the result depends on the structure of each layer: composition, finish, thickness, hardness and permeability. We recommend preliminary trials, to confirm that the final composite is what your customer wants. After that, each production run is recorded.

Quality and certifications

Layers in cross-section

Laminated sample in cross-section, with blue textile, green foam and grey foam bonded in three layers
Blue laminate with a white textile backing, seen in cross-section

Frequently asked questions

How many layers can you laminate?

Three or more, depending on the project.

Can you use different adhesives at each joint?

Yes, when the project calls for it. The choice is made joint by joint, from the materials each one joins.

Do you make self-adhesive laminates?

Yes. With PSA on one side or both, and silicone paper or film protecting the adhesive on each coated side.

Does the laminate withstand washing?

With reactive PUR, multilayer lamination stays flexible, elastic and resistant to washing and temperature. Tell us the wash cycle you need.

Can I send my own material?

You can send your layers in roll form, or ask for some of those we supply: nonwovens, knits, twills and foams.

Request a quote for your laminate

Tell us the layers (materials and order), the roll width, the end use and the quantity. You can attach data sheets and specifications.

Request a quote