Lamination and coating of textiles and foams for automotive interiors

FERCOS laminates textiles, foams and membranes in roll form for car interiors: upholstery, door and roof linings, carpets. We use reactive PUR, hot melt (polyolefin, EVA) and PSA, always 100% solid adhesives. We work to order.

Request a quote

What a car interior asks of the adhesive

A car interior is a demanding place for an adhesive. There is vibration, mechanical stress and large swings in temperature, and there can be no harmful fumes or gases. The laminate the maker cuts and assembles has to withstand all of that for years.

That is why the adhesive is chosen for the temperature the part has to withstand, not for its price. Polyolefin resists a wide temperature range and vibration, cross-linked PUR stops softening with heat, and PSA replaces mechanical fasteners where weight counts.

Which adhesive for each part

Polyolefin (hot melt)

Strong adhesion that resists vibration and mechanical stress without releasing harmful fumes or gases. Used in upholstery, roofs, linings and carpets.

Hot melt coating

Reactive PUR

Resists heat once cured. FERCOS also has a high-performance PUR hot melt, unfilled and low-emission.

Reactive PUR lamination

PSA (double-sided tape)

Replaces mechanical fasteners in vehicle manufacturing, with less weight and easier assembly.

PSA self-adhesive coating

Membranes

Adhesives, thermo-adhesive films, webbing and membranes to laminate upholstery fabrics and door and roof linings.

Membrane lamination

Materials we laminate for automotive

  • Technical textiles and upholstery fabrics
  • Foams
  • Nonwovens and felts
  • Membranes and thermo-adhesive films
  • Webbing
  • Synthetics and synthetic leather

Where they are used

Seat upholstery

Textiles laminated with foam, which the maker cuts and assembles.

Headlinings and roof linings

Light laminates, with the adhesion a roof demands.

Door linings

Fabrics laminated with membranes and thermo-adhesive films.

Carpets and insulation

Materials with adhesive, ready to apply.

What we can do for you

ParameterValue
What we processRoll materials, for the maker to cut and assemble
AdhesivesPolyolefin and EVA (hot melt), reactive PUR and PSA, all 100% solid
Sector standards and approvals FERCOS meetsOn request
Usable widthOn request
Minimum order, sample and lead timesOn request

Advantages and limitations

Advantages

  • The adhesive is chosen for the temperature and stress the part withstands.
  • Adhesives with no solvents or water base, and no relevant VOC emissions.
  • One supplier for hot melt, PUR, PSA and membranes.
  • Each production run is recorded per customer and per lot.

Limitations

  • We process roll materials. Moulded parts and finished components are not for us.
  • A thermoplastic hot melt softens again with heat. If the part has to withstand a lot of heat, cross-linked PUR is chosen.
  • PUR needs curing time, and the part should not be stressed before.

Guide: Hot melt, PUR or PSA?

Every lot, on record

The FERCOS traceability system records adhesive weight, width, tensions, temperatures, pressures and the adhesive lot, per customer and per production run. For automotive, where a lot may have to be followed to the part, that is the record that matters.

Quality and certifications

Laminates in roll form

Amber-coloured laminate roll on its core, at the FERCOS slitting and rewinding line
Grey laminate coming off the roll on the FERCOS lamination line

Frequently asked questions

Which adhesive best resists heat in a car interior?

Reactive PUR, once cured, because it cross-links and stops softening. Polyolefin and copolyamide also resist well. Tell us the temperature of the part.

Do you have low-emission adhesives?

Yes. All adhesives are 100% solid, with no solvents, and we have a high-performance PUR hot melt, unfilled and low-emission.

Do you laminate upholstery fabrics and door linings?

Yes. We laminate upholstery fabrics and door and roof linings, with adhesives, thermo-adhesive films, webbing and membranes.

Which automotive standards do you meet?

The adhesives comply with REACH, OEKO-TEX® Standard 100 and the CADS list.

Do you follow the lot to the part?

Each production run is recorded per customer, with the adhesive lot, temperatures, pressures and tensions.

Request a quote for your automotive component

Tell us the materials, the roll width, the part, the temperature it withstands and the quantity. You can attach data sheets and specifications.

Request a quote