Direct bonding of two roll materials (two-layer lamination)

FERCOS bonds two roll materials face to face with hot melt, reactive PUR or PSA adhesive. The result is a two-layer laminate that combines the properties of both: a fabric with a membrane, a foam with a fabric, a nonwoven with a film. We work to order.

Request a quote

How direct bonding works

Two rolls go into the machine and one comes out. The adhesive is applied hot to one material, the second is joined to it under pressure, and the assembly cools or cures, depending on the adhesive. Whoever receives the laminate receives it already bonded.

It is different from coating. In coating, the adhesive stays on the surface of one material, waiting for a future bond. In direct bonding, the two materials leave already bonded.

Bonding gives the materials properties that neither had alone: waterproofing and repellency, heat resistance, wind resistance, anti-slip effect and flame-retardant properties.

Multilayer lamination (three or more materials)

Which adhesive for your bond

The choice depends on the heat, moisture and stress the finished product withstands, and on how your customer will assemble it. These are the three routes.

Heat-activated hot melt

Fast, hot bonding, in EVA, polyolefin, copolyamide or copolyester. The family is chosen by the heat the finished part has to withstand.

Hot melt coating

Reactive PUR

An elastic bond that, after curing, resists heat and water. It is the choice for membranes and heat-sensitive materials.

Reactive PUR lamination

PSA (self-adhesive)

Bonds by pressure, with the adhesive protected by release paper. It is the choice when one of the materials is only bonded at assembly.

PSA self-adhesive coating

Materials we bond

  • Technical fabrics and knits
  • Nonwovens and felts
  • Decorative foils
  • Breathable, waterproof and barrier membranes
  • Lace
  • Synthetic leathers and leather imitations
  • Foams and cork

Where a two-layer laminate is used

Clothing, sports and fashion

Fabrics with a membrane, or with foam, for clothing that has to be light and protect.

Protection, medical and military

Laminates with flame-retardant, barrier or waterproofing properties.

Home textiles and automotive

Bonded fabrics and foams for upholstery, linings and coverings.

Digital printing and packaging

Materials bonded to a backing, ready for the customer's next step.

Footwear and insolesAutomotiveHome textiles and mattresses

Technical capabilities

ParameterValue
Materials per passTwo. For three or more, multilayer lamination
AdhesivesHot melt (EVA, PO, CoPA, CoPES), reactive PUR or PSA
Usable widthOn request
Adhesive weight (g/m²)On request
Material thickness and weightOn request
Minimum order and sample quantityOn request
Typical lead times (sample and production)On request
Delivery formatOn request
Process controlAutomatic monitoring of adhesive weight, width and tensions

Advantages and limitations

Advantages

  • One laminate comes out, with the properties of both materials.
  • It joins very different materials, from a membrane to a foam or a fabric.
  • It works with hot melt, PUR or PSA, depending on what the finished product has to withstand.
  • It is recorded per roll: adhesive weight, tensions, temperatures and adhesive lot.

Limitations

  • It joins two materials per pass. For more layers, that is multilayer lamination.
  • Some adhesives make the fabric stiffer. Many keep it flexible and elastic once cured, but only a trial confirms it.
  • The composition, finish, thickness, hardness and permeability of each material count. That is why we advise preliminary trials.

Guide: Hot melt, PUR or PSA?

Trial before production

In direct bonding, what decides the result is the structure of each material. We recommend preliminary trials, to confirm that the final laminate is what your customer wants, and we then record the production run per customer.

Quality and certifications

The bonding line

FERCOS bonding line, with the control panel and the fabric running through
Grey laminate coming off the roll on the FERCOS bonding line

Frequently asked questions

How many materials do you bond at a time?

Two per pass. For three or more layers, we use multilayer lamination.

Which adhesive should I choose: hot melt, PUR or PSA?

It depends on the heat, moisture and stress the finished product withstands, and how it will be assembled. Tell us the end use and we propose the adhesive.

Does the laminate become stiff?

Some adhesives make the fabric stiffer, but many keep it flexible and elastic once cured. We run a trial with your materials.

Does bonding a membrane keep it breathable?

It depends on the adhesive and the amount applied. A continuous application closes the material, and a more open one lets it breathe. Tell us the requirement.

Can I ask for a trial with my material?

You can, and we recommend it. Tell us the materials and the end use.

Request a quote for your bonding job

Tell us the two materials, the roll width, the end use of the laminate and the quantity. You can attach data sheets and specifications.

Request a quote