Products supplied
Non-Wovens,
Felts and Filling Paste
Application sectors
Where our non-wovens are used

Automotive
There are many possible uses for non-wovens in the automotive sector, particularly in the production of non-aesthetic components.
Customised solutions are often developed on specific request, made easier by the experience acquired and by the range of technologies available. Flexibility and speed of supply are also key elements in the growth of this sector.

Beauty
A sector served mainly in the production of depilatory strips and rolls, with a very varied range of articles.
To the classics, produced with Chemical Bonded technology, we have recently added those obtained with Spunlace technology, which allow the depilatory backing to be customised in weight, composition and colour. Specifically, the FERPULLTEX article is used in weights of 70/75/85 g/m² for the production of depilatory rolls and strips intended for the consumer market and large-scale distribution.

Filtration
An application sector with many possibilities and highly differentiated requests, which can only be met thanks to the flexibility and availability of several production technologies, allowing customised solutions specific to each need.
The FERFILT 120 and FERFILT 165 articles are used mainly in the construction of pleated cabin filters in the automotive sector, while FERBESTBOND in polyester, weighing 20 g/m², is a valid web for building high-performance air filters when combined with other materials such as paper or glass microfibre.

Footwear
There are countless footwear components in which our non-woven is used.
The FEREGON article is used as reinforcement or as an anti-slip layer in the production of technical, sports and safety footwear, while FERFILT 85 is used in the production of thermoplastic resin insoles. FERNEWJET, with a wide choice of weights, colours and treatments (water- and oil-repellent, antibacterial), is an ideal backing for uppers and also suitable for spreading with latex foam in insole production. The range is completed by our felts (FERCISELLINA) and by the FERLINTEC article, used as inner lining.

Synthetic leather and coating
One of the most traditional applications; its relevance has declined compared with the past, but it has recently shown some vitality.
Thanks to the many production technologies available, any type of non-woven backing can be proposed for the production, by transfer coating, of synthetic leather for applications such as lining, uppers, leather goods, furniture and automotive. Depending on each sector's needs, articles from the FERNEWJET, FERCISELLINA, FERTEXILINA and FEREGON lines can be used.

Lamination and technical bonding
Lamination covers multiple sectors, such as automotive, footwear, apparel, technical textiles, furniture and decoration, and thermal and acoustic insulation of floors and construction panels.
Here too the possible combinations are many and can satisfy the most varied technical requirements, guaranteeing the supply of backings that represent the state of the art in performance and technical characteristics. Our coating, direct bonding and multilayer services with high-quality hot-melt thermobonding, self-adhesive and reactive (PUR) glues allow our customers to add value to their products.

Insulation
A very varied sector, using articles produced with different technologies (Spunbonded, Chemical Bonded, Thermobonded).
The FERNEWJET, FERPULLTEX and FERTEXILINA articles can be combined with a polyurethane foam for the production of panels suitable for thermal and acoustic insulation in the construction and automotive sectors, or in the production of floating floors. After self-adhesive treatment, FERCISELLINA is an excellent material for sealing internal electrical parts in vehicles.

Embroidery and apparel
Embroidery requires articles that can be customised in weight, thickness and cut to size.
Specifically, FERTEXILINA is used in different weights depending on the garment to be processed; the bidirectional tear-away version is normally used for better performance, and it can also be treated with thermobonding glue for other specific applications. For the apparel sector, unidirectional FERTEXILINA is preferred, for use as interlining; for particular uses, our FERNEWJET and FERCISELLINA are also used.

Disposables, printed goods and table linen
Extremely varied sectors, where the use of non-wovens is widespread.
Our FERPOLIBOND article can be used in the production of disposable accessories for the beauty and medical sectors; FERPULLTEX in the creation of placemats and other disposable accessories for catering; and FERNEWJET in the creation of impregnated wipes for the disinfection of hospital environments, in the preparation of medical and surgical aids and in the treatment of conditions in aesthetic medicine.
Production types
The production technologies we work with
Spunlace (hydroentanglement)
Through the action of high-pressure water jets, the fibres become entangled, producing a regular, soft and compact non-woven with the trade name FERNEWJET.
Available from 30 to 250 g/m² in white, black and colours. Besides polyester, blends of different fibres such as viscose, polypropylene and polyamide are used, resulting in a very wide range of products. These materials are used across many sectors, from sanitary goods to technical assemblies for the automotive sector, filtration, cosmetics and medicine.
In-line treatments are possible, to impart characteristics such as water and oil repellency, fire resistance or another particular finish. To keep our offer aligned with market trends, the complete range of polyester backings can be produced with partial or total use of recycled fibre, certified to the GRS standard.

- Properties
- Strength and absorbency. Weight from 30 g/m² to 250 g/m²; hypoallergenic and non-irritating.
- Finish customisation
- Material suitable for post-treatments to impart the required properties: flame retardancy, water and oil repellency and heat-bonding.
- Application sectors
- Industry, disposables, automotive, footwear, leather goods, coatings, medical and healthcare.
Thermo Bonded
The article is available from 14 to 50 g/m² and is produced by hot calendering of polyester or polypropylene fibres.
This technology makes it possible to obtain extremely regular materials, even at relatively low weights, providing ideal lamination backings in applications where extreme consistency of behaviour is required, such as industrial filtration and technical lamination. It is one of the main materials for the production of masks, once combined with meltblown. Other characteristics are softness and weldability by heat or ultrasound.

- Properties
- Regular, uniform material; its softness and versatility make it usable in multiple applications. Weight range from 14 g/m² to 50 g/m².
- Finish customisation
- Different compositions are available (polyester and polypropylene).
- Application sectors
- Lamination, filtration, technical lamination.
Spunbonded
A non-woven obtained by hot calendering of continuous polypropylene filaments, from 30 g/m² to 100 g/m², under the trade name FERPOLYBOND.
It has high resistance to tearing and to seams, can be ultrasonically welded and is available in the FR (flame-retardant) version, approved both by the Ministry of Internal Affairs for civil applications and by the leading car manufacturers for use in passenger compartments (FMVSS302 standard).

- Properties
- Its high tear and breaking-load resistance makes it extremely versatile; it can be sewn and ultrasonically welded without difficulty. Weight from 30 g/m² to 100 g/m².
- Finish customisation
- Treatments can be applied to make it flame-retardant and UV resistant.
- Application sectors
- Disposables, automotive, lamination, food, packaging.
Needle-punched
A 100% polyester non-woven, from 100 to 400 g/m², in black and white, needle-punched and hot calendered, known as felt and sold under the trade name FERCISELINA.
Its main characteristics are a soft, rounded hand, consistent thickness even at high density and dimensional stability under temperature. All of this makes it suitable for technical processes, such as transfer coating for the production of imitation leather articles, lamination, decoration and the production of gaskets and acoustic insulation details. Post-treatments make it possible to impart self-extinguishing or water-repellent properties, typical of the automotive sector.

- Properties
- Soft, uniform material, even at high thicknesses, with excellent dimensional stability. Weight from 100 g/m² to 400 g/m².
- Finish customisation
- Treatments can be applied to make it flame-retardant and water- and oil-repellent.
- Application sectors
- Industry, coating, lamination, automotive, furniture, garment making.
Chemical Bonded
FERTEXILINE is a basic non-woven obtained by bonding polyester and/or viscose fibres using synthetic binders of various types.
The ability to vary the components in their percentage, combined with the use of latex of different natures, makes it possible to obtain a truly vast range of articles and to meet the needs of many sectors, such as embroidery, apparel, cosmetics, filtration and spreading backings. The combinations are widened by the ability to operate in 2 systems and obtain a random rather than parallel fibre distribution. The weight range runs from 25 to 135 g/m², in black and white.

- Properties
- An extremely articulated product range, with weights from 25 g/m² to 135 g/m².
- Finish customisation
- Different compositions are available (viscose + binder, polyester-viscose + binder), with unidirectional and bidirectional tear.
- Application sectors
- Coating, lamination, embroidery, garment making, leather goods, filtration, shoulder pads.
FEREGON / Split «heel grip»
FEREGON is a type of non-woven resulting from a sequence of very complex processes, such as needle punching, impregnation and horizontal splitting. The ability to intervene in the fibre composition and in the type of latex makes it possible to produce clearly differentiated articles:
FEREGON S and SE: characterised by a rounded, soft hand; thanks to its tensile and tear strength values it is suited as a backing for coated fabrics in the footwear sector. The S version is also used as an anti-slip layer, where a good balance between quality and price matters. A wide range of thicknesses and colours makes it usable in leather goods, footwear, reinforcements and coatings.
FEREGON T: top of the split range, with excellent abrasion resistance, which makes it perfect as an anti-slip layer for footwear. Offered in a wide range of thicknesses (from 0.5 mm to 4 mm) and colours. Also used as a backing for the working surfaces of automatic cutting machines.
FEREGON TT: high-density, first-choice fibres make it possible to obtain an excellent anti-slip article at a very competitive price range.
- Properties
- Smooth material with high breaking loads, available in thicknesses from 0.5 mm to 4 mm.
- Finish customisation
- Different colours and densities are available depending on the main use.
- Application sectors
- Footwear, leather goods, industry.
Filling paste and fibres
FERVOGUE: filling paste and fibres
FERVOGUE is a non-woven filling paste, 100% high-quality polyester (thermo bonded).
- Weight: from 40 g/m² to 2,000 g/m²
- Width: from 0.10 m to 3.10 m
FERVOGUE quilted (filling paste + fabric)
FERVOGUE with fabric (50% PES + 50% CO) in its natural colour. Available quilted with stitching, parallel or diamond, or glued (without stitching).
- Weight: from 60 g/m² to 200 g/m²
- Width: up to 2.80 m


Need something specific?
Contact us and we will present a personalized solution for your needs.
Request a quotation